Our Drying Goals During The Water Restoration Process

3/19/2021 (Permalink)

Our SERVPRO of South Columbus Team uses state of the art equipment during the water restoration process.

Drying Goals During Water Removal In Your Columbus Home

Water damage technicians create a drying goal during your southern Columbus home’s initial assessment. The drying goal should indicate the condition of materials and contents once restored to their natural preloss dryness. Qualified technicians should always monitor the drying process to determine if current procedures remain in-line with any established goals.

A drying goal for water removal at your southern Columbus property is the intended result in affected areas after completing restoration services. Our dedicated technicians use years of experience, training, and advanced equipment to provide moisture content readings from dry, unaffected contents, and structure — readings in percentage for wood materials, and readings in points for non-wood materials.

Our SERVPRO technicians use drier air to increase the rate of evaporation while performing water removal services on your property – drier air means air with low humidity. A relative humidity (RH) of less than 40% is within the normal range for performing an effective drying solution. RH under 40% typically tells us that the air is dry and thirsty, allowing it to pull more water from wet materials within the affected area.

While measurements for RH does not guarantee that your structure is dry, reaching a low RH ensures that humidity within the affected area is decreasing. To determine whether the area is dry, SERVPRO technicians take specific humidity readings of the affected areas; these readings should match those taken in unaffected areas. We use moisture meters to measure the moisture content of wet materials found in your home.

SERVPRO water removal technicians set moisture content goals on a per-item basis – after establishing a drying standard and recording typical equilibrium moisture content (EMC). The dry standard is a moisture content reading taken from dry materials of the same type found in unaffected areas. We establish a dry standard or use a typical EMC of a material as a goal.  Once the readings match, the drying process is complete.

Call our SERVPRO of South Columbus Team for water removal, cleanup, and restoration services, 24-hours a day, 7-days a week.